Technopolymer

Double-register length counter. Partial counter: 4 digits + 2 decimals with reset. Total counter: 6 digits + 1 decimal with reset. Digit height: 8 mm - shaft D.7 mm - bilateral drive. Rotation direction: 0 = clockwise. Maximum counting speed: 500 meters per minute. Overall dimensions: 92x80x76.

Down counter predisposition. 4 digits + 1 decimals, height 8 mm - shaft D.7 mm - bilateral drive. Zero-setting push button. Revolution: 0 = clockwise, S = anti-clockwise. Maximum speed: 500 meters per minute. Dimensions: 92x80x69. Microswitch: 10 ampere. Ratio 2:1 for wheels 500 mm developing (2 revol. = 1 meter).

Down counter predisposition. 5 digits height: 8 mm - shaft D.7 mm - bilateral drive. Zero-setting push button. Revolution: 0 = clockwise, S = anti-clockwise. Maximum speed: 2000 revolutions per minute. Dimensions: 92x80x69. Microswitch: 10 ampere (1 revol. = 1 unit).

Meter indicator for belts: 5 digits + 2 decimals. Digit’s height: 8 mm - shaft D.7 mm - right or left drive. Zero-setting push button. Revolution: 0 = clockwise, S = anti-clockwise. Maximum speed: 50 meters per minute. Dimensions: 92x80x50. Adds in one direction of rotation and subtracts on the opposite. Ratio 1:20, 50 mm drum developing (2 revol. = 1 meter).

Length counter with key reset. 6 digits + 1 decimal, height 8 mm - shaft D.7 mm - bilateral drive. Key reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 500 meters per minute. Overall dimensions: 92x80x50. Adds in one direction of rotation and subtracts in the opposite direction. Ratio 2:1 for wheels with 500 mm development (2 revolutions = 1 meter).

Revolution counter with key reset. 6 digits, height 8 mm - shaft D.7 mm - bilateral drive. Key reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 600 revolutions per minute. Overall dimensions: 92x80x50. Adds in one direction of rotation and subtracts in the opposite direction. Ratio 1:1 (1 revolution = 1 meter).

Stroke counter with key reset. 7 digits, height 8 mm - shaft D.7 mm - bilateral drive. Key reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 500 strokes per minute. Overall dimensions: 92x80x50.

Stroke counter with reset. 5 digits, height 4.5 mm - shaft D.6 mm - bilateral drive. Push-button reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 700 strokes per minute. Overall dimensions: 82x46x35.

Revolution counter with reset. 5 digits, height 4.5 mm - shaft D.6 mm - bilateral drive. Push-button reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 5000 revolutions per minute. Overall dimensions: 82x46x35. Adds in one direction of rotation and subtracts in the opposite direction. Ratio 1:1 (1 revolution = 1 unit).

Length counter with reset. 4 digits + 1 decimal, height 4.5 mm - shaft D.6 mm - bilateral drive. Push-button reset. Rotation direction: 0 = clockwise, S = counter-clockwise. Maximum counting speed: 500 meters per minute. Overall dimensions: 82x46x35. Adds in one direction of rotation and subtracts in the opposite direction. Ratio 5:1 for wheels with 200 mm development (5 revolutions = 1 meter).

Manual revolution counter with reset. 5 digits, height 4.5 mm. Actuation: steel tip for low speeds, rubber tip for high speeds. Push-button reset. Counting direction: adds in both directions of rotation. Maximum counting speed: 6000 revolutions per minute. Overall dimensions: 68x40x32. Can also be reset while running. Ratio 1:1 (1 revolution = 1 unit).

For sheetworking and woodworking machines, 4 digits height 8 mm – shaft D.6 mm - direct drive. Revolution: 0 = clockwise, S = anti-clockwise. Dimensions: 80x76x51. Position drive shaft: A = up, B = down, C = back, D = bilateral. Ratios: for each drive shaft revolution 5 numbers, or 10 numbers or 50 numbers.