Products Gamm

Duraluminium structure.

Manual revolution counter with reset. 5 digits, height 4.5 mm. Actuation: steel tip for low speeds, rubber tip for high speeds. Push-button reset. Counting direction: adds in both directions of rotation. Maximum counting speed: 6000 revolutions per minute. Overall dimensions: 68x40x32. Can also be reset while running. Ratio 1:1 (1 revolution = 1 unit).

For sheetworking and woodworking machines, 4 digits height 8 mm – shaft D.6 mm - direct drive. Revolution: 0 = clockwise, S = anti-clockwise. Dimensions: 80x76x51. Position drive shaft: A = up, B = down, C = back, D = bilateral. Ratios: for each drive shaft revolution 5 numbers, or 10 numbers or 50 numbers.

Tally counter. Quickly counts moving items, or stationary items while the operator is moving. Instant reset with knurled button. 4 digits, height 4.5 mm. Supplied in a faux-leather case.

Indicator for coin-counter machine. 5 digits height: 4.5 mm – shaft D.4 mm – right drive. Zero-setting push button. Revolution: 0 = clockwise, S = anti-clockwise. Maximum speed: 2000 revolutions per minute. Dimensions: 58x35x31.

Fastened at base. 6 digits height: 4.5 mm. Maximum speed: 20 in DC – 15 in AC per second. Dimensions: 70x47,5x25. Power: from 6 to 220 volt in DC or AC.

Fastened by spring. 6 digits height: 4.5 mm. Maximum speed: 20 in DC – 15 in AC per second. Dimensions: 70x47,5x25. Power: from 6 to 220 volt in DC or AC.

Fastened by screws. 5 digits height: 4.5 mm. Maximum speed: 20 in DC – 15 in AC per second. Dimensions: 70x47,5x25. Power: from 6 to 220 volt in DC or AC.

Articulated foot. Ball stud in galvanized steel.

Articulated foot. Ball stud in AISI 304 stainless steel.

Zinc-plated steel threaded pin.

Zinc-plated steel threaded pin. Zinc plated steel bushing and threaded blind hole.